Does Garbage Disposal Need P Trap

There are a lot of people that say that a garbage disposal doesn’t need a p trap, but there are also a lot of people that say that it does. So, what’s the real answer? Well, it really depends on your specific situation.

If you have a lot of food waste that you dispose of on a regular basis, then it is probably a good idea to have a p trap. This will help to keep your drains clear and prevent any clogs from forming. However, if you don’t have a lot of food waste, then you probably don’t need a p trap.

How Do P-Traps Work? 5 Drain Issues to Watch Out For

If you have a garbage disposal in your home, you may be wondering if you need a p-trap. The answer is yes! A p-trap is a essential part of your garbage disposal system.

The p-trap is what keeps sewer gas and bad odors from coming up through your disposal and into your home. Without a p-trap, your home could start to smell like sewage. So if you want to keep your home smelling fresh and clean, make sure you have a p-trap installed.

Garbage disposal into p trap

If your garbage disposal is properly installed, then there should be a p-trap installed underneath it. The p-trap is there to catch any debris that may fall down the drain so that it doesn’t clog up your pipes. You can clean out the p-trap periodically to prevent any build-up.

does garbage disposal need p trap


Where is the P-trap on a garbage disposal?

If you’re like most people, you probably don’t think much about your garbage disposal. But when something goes wrong, it can quickly become a major headache. One of the most common problems with garbage disposals is a clogged P-trap.

So, what is a P-trap? It’s a U-shaped pipe that connects to the drain and traps debris so it doesn’t clog the plumbing. It’s usually located under the sink, and you can usually see it if you look under the sink.

If your garbage disposal is clogged, the first thing you should do is check the P-trap to see if it’s full of debris. If it is, you’ll need to clean it out. The easiest way to do this is to remove the P-trap and flush it out with a hose.

If the P-trap is clean and the garbage disposal is still clogged, the next step is to check the drain lines. There are two drain lines that connect to the garbage disposal, and they can sometimes become clogged with grease and other debris. To clean the drain lines, you’ll need to remove the disposal and disconnect the drain lines.

Then, use a plunger or a plumber’s snake to clear the clog. If you’ve checked the P-trap and the drain lines and the garbage disposal is still clogged, the problem may be with the disposal itself. In this case, you’ll need to call a plumber to have the disposal repaired or replaced.

How do you install a P-trap in a garbage disposal?

Most garbage disposals come with a P-trap already installed. However, if yours does not, or if you need to replace your P-trap, here is how to do it. First, make sure that the power to your garbage disposal is turned off.

Next, locate the P-trap. It will be located under your sink, and will have two curved pipes coming out of it – one going into the garbage disposal, and the other going into the drain. Loosen the nut that is holding the P-trap in place, and then remove the P-trap.

Be careful not to lose the washers that are located on either side of the P-trap – you will need these for the new P-trap. Now, take your new P-trap and place it in the same location as the old one. Make sure that the washers are in place, and then tighten the nut to hold it in place.

Finally, turn the power back on to your garbage disposal, and test it out to make sure that it is working properly.

How far below the garbage disposal should the P-trap be?

There are a few things to consider when determining how far below the garbage disposal the P-trap should be. The first is the size of the P-trap. The second is the height of the drainpipe.

And the third is the distance from the P-trap to the bottom of the sink. The size of the P-trap will determine how far below the garbage disposal the P-trap needs to be. The standard size for a P-trap is 1 1/2 inches.

However, if you have a larger P-trap, you may need to adjust the height accordingly. The height of the drainpipe will also play a role in determining the height of the P-trap. The average height of a drainpipe is about 18 inches.

However, if your drainpipe is taller or shorter, you will need to adjust the height of the P-trap accordingly. The distance from the P-trap to the bottom of the sink is also important to consider. The average distance is about 12 inches.

However, if your sink is deeper or shallower, you will need to adjust the distance accordingly. In general, the P-trap should be installed so that it is about 12 inches below the garbage disposal and 18 inches from the bottom of the sink. However, these measurements may need to be adjusted depending on the specific circumstances of your installation.

Do I need a sink strainer if I have a garbage disposal?

If you have a garbage disposal, you might not need a sink strainer. It depends on what type of garbage disposal you have. If you have a continuous-feed disposal, you won’t need a strainer because the food waste is ground up as it goes through the disposal.

If you have a batch-feed disposal, you might need a strainer to catch any food waste that doesn’t get ground up in the disposal.


If you have a garbage disposal in your kitchen, you may be wondering if you need a p trap. The answer is yes! A p trap is important because it prevents sewage gases from coming up through your drain and into your home.

It also helps to keep your drain clear by catching any food scraps or debris that might otherwise go down the drain and cause a clog. So if you have a garbage disposal, be sure to install a p trap!

About Author:

Danyal is a Freelance Copywriter that has been writing for online publications including Home improvement, newsworthy blogs and even a few personal blogs. He has a passion for writing and loves to share his knowledge with everyone who wants quality information.

Leave a Comment