Common problem homeowners face is a faucet handle goes beyond the normal stopping point. This can be caused by many different factors, but it’s always best to have a professional take a look at things. Plumbers are experts in handling these issues and will know what course of action should be taken. In this blog post, we’ll talk about some of the most common causes for this issue as well as how you can prevent it from happening again.
Faucet handles are typically designed to stop at a certain point so that the water can’t be turned on or off easily. This is for safety purposes, but sometimes the faucet handle goes beyond this stopping point and it makes turning off the water very difficult. This blog post will explain how you can fix the “Faucet handle goes beyond normal stopping point”.
If the handle on your faucet turns too far, not enough, or in a direction that isn’t desired, it is usually because of an issue with the valve stem. The handle can sometimes spin without turning on the water, which usually means that it’s stripped and needs to be replaced.
But why faucet handle goes beyond the normal stopping point?
Wrong Alignment of Faucet Handles:
If the handle on your faucet doesn’t seem to be lining up with the valve stem, it might be because the washer is out of alignment. In this case, the washer won’t allow for a proper connection between the handle and valve stem.
How to Align Faucet Handles:
If the handle on your faucet seems to be out of alignment, you can try to realign it by following these simple steps:
- Shut off the water to the faucet. Turn on all of your faucets so that there is no pressure in the lines.
- Unscrew the handle from the valve stem.
- After removing the handle without its screw, pushed it
- Make sure there’s enough play between the faucet cartridge and valve housing. If it won’t move, don’t force them!
- When you can’t get the cartridge out, put on a handle and replace it in its correct position.
- Tighten the valve nut and replace the handle. Make sure you turn water back on after!
Don’t turns in the Wrong Direction:
The handles on cartridge faucets turn only through 90 degrees, while those of a widespread type can be installed separately from the spout. In order to avoid having your faucet handle turn in the wrong direction, you’ll need to change both handles.
One of the most common mistakes is to forget about connecting one lever from a faucet with another. When a faucet handle turns in the wrong direction, it isn’t always due to bad installation or misuse. Sometimes this is because of an incorrect replacement cartridge that you’ve purchased for your home’s plumbing needs!
Make sure that you don’t connect the wrong lever to your faucet base!
Temperature Limiter issues!
When the handle of a faucet goes beyond its normal stopping point, it’s usually because there is some kind of temperature-limiting device installed. This is because these devices are meant to help children and elderly people from turning on the hot water accidentally.
If you need to adjust your RSL, just remove the handle and metal sleeve behind it. If there is one, then find this small plastic ribbed wheel on top of the stem for adjustment with an opposite direction turn compared to how far downstream water flows through the valve from when opened fully the first time around – that should make things easy enough!
Hope you got an idea about fixing Faucet Handle Goes Beyond Normal Stopping Point Problem. Please do share this post with your friends and family. If you have any questions about the Faucet Handle Goes Beyond Normal Stopping Point Problem, please comment below. I would love to help you out!
Cheers! 🙂
Related Posts: