How To Clean Sink Pop Up Stopper

If your bathroom sink has a pop-up stopper, it’s important to keep it clean to prevent the spread of bacteria. Here’s how to clean a pop-up stopper: First, lift up the stopper and remove any hair or debris that may be caught in it.

Next, use a toothbrush or other small brush to clean around the base of the stopper, where it meets the sink. If your stopper is still looking dirty, you can soak it in a mixture of vinegar and water for a few minutes, then scrub it with the brush. Rinse it well and replace it in the sink.

  • Unscrew the top part of the pop up stopper
  • Take out the stopper and clean it with soapy water
  • Rinse the stopper and put it back in the sink
  • Screw the top part of the pop up stopper back on

How to remove pop up sink plug

Assuming you are referring to a pop up sink stopper, they are relatively easy to remove. The first thing you want to do is locate the knob or lever that is attached to the stopper. In most cases, this will be located on the top of the stopper.

Once you have located the knob, simply turn it in a counterclockwise direction until the stopper pops up. If your sink does not have a knob or lever, then you will need to use a pair of pliers to remove the stopper. Simply grab onto the stopper and turn it in a counterclockwise direction until it pops up.

how to clean sink pop up stopper

Credit: www.thespruce.com

How do you clean a sink pop-up drain stopper?

Assuming you are talking about a pop-up drain stopper for a bathroom sink: The first step is to remove the pop-up stopper from the sink. To do this, you will need to locate the knob or lever that is used to open and close the stopper.

In some cases, this knob or lever will be located on top of the sink. In other cases, it will be located on the side of the sink. Once you have located the knob or lever, you will need to turn it in the correct direction to loosen the stopper.

In most cases, you will need to turn the knob or lever counterclockwise to loosen the stopper. After you have loosened the stopper, you should be able to simply pull it up and out of the sink. With the stopper removed, you will now be able to clean it.

The best way to clean the stopper is to soak it in a solution of equal parts water and vinegar. Let the stopper soak in this solution for at least 30 minutes. After the stopper has soaked, you will need to rinse it off.

The best way to do this is to simply place it back in the sink and turn on the faucet. Let the water run over the stopper for a minute or two. Once the stopper is clean, you can put it back in the sink.

How do you clean hair out of a pop-up drain?

If you have a pop-up drain that is starting to get clogged with hair, there are a few things you can do to clean it out. One option is to use a plunger to try and dislodge the hair. Another option is to use a wire hanger to fish the hair out.

If neither of these options work, you may need to disassemble the pop-up drain and clean it out that way. To disassemble the pop-up drain, start by removing the cap on the top of the drain. Then, use a pair of pliers to remove the stopper from the drain.

Once the stopper is removed, you should be able to see the hair that is clogging the drain. Use a wire hanger or a similar tool to fish the hair out of the drain. Once you have removed all of the hair, reassemble the pop-up drain and test it to make sure it is working properly.

How do you clean a sink stopper?

Assuming you are talking about a sink drain stopper, there are a few different types, but the process for cleaning them is generally the same. If your stopper is the type that flips up and down, you can start by removing it from the drain. To do this, you will need to unscrew the knob at the top of the stopper (this may be Phillips head or flat head screws).

With the knob removed, you should be able to pull the stopper out. If it is stuck, you may need to use a plunger to loosen it. Once the stopper is out, you can clean it with soap and water.

Be sure to get in all the nooks and crannies, as this is where dirt and hair tend to build up. If your stopper is particularly dirty, you can soak it in vinegar or bleach for a few minutes before scrubbing. If your sink stopper is the push/pull type, it will be attached to the drain with a rod.

To remove it, you will need to unscrew the top part of the stopper (again, this may be Phillips head or flat head screws). With the top removed, you should be able to pull the stopper out. If it is stuck, you may need to use a plunger to loosen it.

Once the stopper is out, you can clean it with soap and water.

How to Remove DRAIN STOPPER POP UP!! (Unclog Cleaning Hacks) | Andrea Jean Cleaning

Conclusion

If your bathroom sink has a pop-up stopper, it’s important to keep it clean to prevent bacteria from building up. Here’s how to clean a pop-up stopper: 1. Remove the stopper from the sink.

2. Fill a bowl with warm water and add a drop of dish soap. 3. Submerge the stopper in the soapy water and use your fingers to scrub away any dirt or grime. 4. Rinse the stopper well under running water.

5. Place the stopper back in the sink and run the water for a few seconds to test it.

About Author:

Danyal is a Freelance Copywriter that has been writing for online publications including Home improvement, newsworthy blogs and even a few personal blogs. He has a passion for writing and loves to share his knowledge with everyone who wants quality information.

Leave a Comment