If your bathroom sink is stopped up, there are a few things you can do to fix it. First, try using a plunger. If that doesn’t work, you can try using a snake or an auger.
If those don’t work, you can try using a chemical drain cleaner. If none of those work, you may need to call a plumber.
- Check to see if the sink stopper is properly connected to the drain
- If it is not, follow the instructions that came with the stopper to properly connect it
- If the stopper is properly connected and the sink is still not draining, check to see if the stopper is closed all the way
- If it is not, simply push it down until it is fully closed
- If the stopper is fully closed and the sink is still not draining, there may be a clog in the drain
- Use a plunger to try to dislodge the clog
- If the plunger does not work, you may need to use a plumbers’ snake to clear the clog
- If you have tried all of the above and the sink is still not draining, there may be a problem with the P-trap
- Disassemble the P-trap and clean it out
- Reassemble the P-trap and see if that fixes the problem
FAST Sink Drain Stopper Repair
Sink stopper won’t come up
If you’re dealing with a sink stopper that won’t come up, there are a few potential causes. It could be that the chain is too tight, preventing the stopper from being lifted. It could also be that the linkage between the stopper and the drain is damaged or obstructed.
In either case, you’ll need to take a look at the sink stopper and drain to see what the issue is.
If the chain is too tight, you’ll need to loosen it. This can usually be done by simply adjusting the nut that connects the chain to the drain.
If the linkage is damaged or obstructed, you may need to replace it. This is a relatively easy repair that you can do yourself, but you’ll need to have the right parts on hand.
In either case, once you’ve identified the issue, you should be able to fix it relatively easily.
If you’re having trouble, there are plenty of resources available online to help you troubleshoot the issue. With a little patience, you should be able to get your sink stopper working properly again in no time.
Credit: www.thespruce.com
How do you reattach a bathroom sink stopper?
There are a few different ways that you can reattach a bathroom sink stopper, depending on the type of sink stopper you have. If you have a pop-up sink stopper, the first thing you’ll need to do is remove the lift rod from the sink. To do this, you’ll need to unscrew the knob at the top of the lift rod, and then pull the lift rod up and out of the sink.
Next, you’ll need to remove the plug from the pop-up assembly. To do this, you’ll need to unscrew the cap on the pop-up assembly, and then pull the plug out. Once the plug is removed, you’ll be able to see the rubber gasket that sits on top of the drain.
Simply place the gasket back onto the drain, and then screw the cap back onto the pop-up assembly. Finally, reattach the lift rod to the sink by screwing the knob back onto the top of the lift rod.
If you have a plunger-type sink stopper, the first thing you’ll need to do is remove the knob from the top of the stopper.
To do this, you’ll need to unscrew the screw that holds the knob in place, and then pull the knob off. Next, you’ll need to remove the rubber cup from the stopper. To do this, simply pull the rubber cup off of the stopper.
Once the rubber cup is removed, you’ll be able to see the rubber gasket that sits on top of the drain. Simply place the gasket back onto the drain, and then screw the cap back onto the pop-up assembly. Finally, reattach the lift rod to the sink by screwing the knob back onto the top of the lift rod.
How do you fix a pop-up sink plug?
When troubleshooting a pop-up sink plug, the first thing you should check is the linkage. The linkage is the metal rod that connects the plug to the knob or lever. If the linkage is loose, tighten the set screw that holds it in place.
If the linkage is not the problem, the next thing to check is the drain stopper. The drain stopper is the round, disc-shaped piece that seals the drain. If the stopper is not sealing properly, clean it with a mild soap and water solution.
If the stopper is still not sealing properly, it may need to be replaced.
To replace the drain stopper, first remove the old stopper. To do this, unscrew the knob or lever.
This will release the tension on the linkage, allowing you to remove the drain stopper. Next, insert the new drain stopper into the drain. Be sure to align the stopper so that it seals properly.
Finally, screw the knob or lever back into place.
If you have followed these steps and the pop-up sink plug still does not work properly, the problem may be with the drain itself. If this is the case, you will need to contact a plumber.
Conclusion
If your bathroom sink stopper is broken or damaged, it can be easily fixed with a few simple steps. First, remove the sink stopper from the sink. Next, use a pair of pliers to remove the broken or damaged part of the stopper.
Finally, replace the broken or damaged part with a new one and reattach the stopper to the sink.