How To Install Moen Essie Kitchen Faucet (10 Simple Steps)

Disclaimer: As an Amazon Associate I earn from qualifying purchases.

Updated: June, 2022

To Install Moen Essie Kitchen Faucet, you will need to follow the instructions that come with the faucet. This Moen Faucet will work for almost every type of sink. If you do not want to hire a plumber friend or an expensive professional, there is no need to worry at all as this article will explain the step-by-step procedure on ‘How To Install Moen Essie Kitchen Faucet?

Let’s continue,

What tools do you need to Install Moen Essie Kitchen Faucet?

Before you start installing your faucet on the sink, you have to prepare all the needed tools. So here is a list of things that you’ll need for this project. You may already have some of these tools in your toolbox.

  • Adjustable wrench
  • Channel lock pliers
  • Screwdriver – drill with a bit (if you are drilling the sink for this project)
  • Plumber’s putty
  • Towels, cloths to wipe up water
  • Moen Essie kitchen faucet assembly kit included with the faucet

Step by step guide to Install Moen Essie Kitchen Faucet:

To make the installation process easier, we list 10 steps on how to install the Moen Essie kitchen faucet.

These are:

Step 1: You will need a towel, a bucket, a screwdriver, and a plumber’s putty.

Step 2: The first step is to turn off the water that supplies your kitchen faucet. Turn the handle clockwise until it doesn’t go any further.

Step 3: You’ll then need to remove the aerator from your sink. The aerator is located right on the tip of your faucet. You can use a wrench to remove it if necessary.

Step 4: Use an adjustable wrench to detach the hot and cold water lines. Be sure to place a bucket underneath them first, as there will likely be some dripping before you’re done.

Step 5: Disconnect the spray hose from underneath your sink. You can use a screwdriver to remove it by loosening up the hose clamp and pulling the hose off the faucet.

Step 6: Remove all of your old plumber’s putty from around the base of your faucet where a washer and nut are holding it in place. You can use a towel to clean off the excess.

Step 7: Apply a new plumber’s putty around where the washer and nut are located to ensure that your faucet is watertight once installed. Place your faucet back in its proper location and screw it on tight with an adjustable wrench.

Step 8: Reconnect the spray hose underneath your sink and tighten it using an adjustable wrench. Make sure you have a new faucet washer to ensure there won’t be any leaks.

Step 9: Reconnect your hot and cold water lines by carefully lining them up with your faucet, then tightening the nuts back on with an adjustable wrench. Do the same for your spray hose.

Step 10: Turn on your water supply to test out all of your new plumbing. If everything is done correctly, you’ll have a great faucet with no leaks!

By following these steps, you should be able to install any new kitchen faucet yourself without hiring an expensive plumber. These steps are for Moen Essie Kitchen Faucet but will help you with other brands too.

FAQ – Frequently Asked Questions

What design are Moen Essie kitchen faucets?

Moen Essie has a transitional design. It comes with a high spout which makes it easy for users to access water from it. Along with the clean lines, its classic style will enhance your kitchen’s décor. It also features a long list of precision spray features which you can access by pressing the button on the side.

How do I clean Moen Essie kitchen faucet?

You can use a cotton swab dipped in a mild cleaner to remove hard water stains. You can also use your vacuum cleaner’s soft bristle brush attachment to gently clean around and under your faucet. The next step is to use vinegar and soap or a toothbrush to remove hard water spots or stains stuck on your faucet.

Does Moen Essie come with a warranty?

Yes, it comes with a limited lifetime faucet and finishes warranty.

Where can I find replacement parts for Moen Essie Kitchen Faucet? 

You can contact the customer service department of Moen to get replacement parts. You may also look for replacement parts of the Moen kitchen faucet online or at your local home improvement stores.

What are some good tips on how to install Moen Essie kitchen faucet?

You can find these tips in the article above.

Is it hard to install Moen Essie Kitchen Faucet?

It’s not too hard to do but does require some patience, time, and effort. By following the above steps, you should install a Moen Essie kitchen faucet on your own.

Do you have to use plumbers’ putty when installing a new faucet?

Yes, it is part of the process so that the connection between the faucet and spray head will be watertight.

What size wrench do you need to remove an aerator?

It depends on the type of aerator, but most generally uses a crescent wrench. Be careful not to damage your faucet.

Are hot and cold water lines always required to be connected?

Yes, they are. If one is disconnected, then the faucet will not be able to deliver hot or cold water.

What is the purpose of an aerator?

It mixes air with water before it comes out of the faucet. This can make it easier to fill certain containers and rinse off dishes.

Where do the O rings go on a Moen kitchen faucet?

O rings are located on the valve stems just below the handles.

About Author:

Danyal is a Freelance Copywriter that has been writing for online publications including Home improvement, newsworthy blogs and even a few personal blogs. He has a passion for writing and loves to share his knowledge with everyone who wants quality information.

Leave a Comment