How to Refill a Lysol Automatic Soap Dispenser

Lysol automatic soap dispensers are a great way to keep your hands clean and free of germs. But what do you do when the soap runs out? You can’t just throw away the dispenser, and buying refills can be expensive.

Here’s how to refill your Lysol automatic soap dispenser on the cheap.

  • Remove the dispenser from the wall mount or countertop
  • Unscrew the top of the dispenser to reveal the soap reservoir
  • Pour soap into the reservoir until it is full
  • Replace the top of the dispenser and screw it back on tightly
  • Place the dispenser back on the wall mount or countertop

How to Refill Lysol Automatic Dispenser Soap Healthy Touch / No Touch

How to Refill Automatic Soap Dispenser

If you’re like most people, you probably don’t think much about your soap dispenser. But if you have an automatic soap dispenser, it’s important to know how to refill it properly. Here’s a step-by-step guide:

1. Remove the old soap container from the dispenser. If there is any residual soap in the container, pour it into a sink or trash can. 2. Open the new soap container and pour the soap into the reservoir of the dispenser.

Be careful not to overfill it. 3. Close the reservoir and screw on the cap tightly. Wipe away any soap that may have spilled on the outside of the dispenser.

How to Refill a Lysol Automatic Soap Dispenser


Can You Refill the Lysol No Touch Soap Dispenser?

If you’re like me, you love the Lysol No Touch soap dispenser. It’s so convenient and easy to use! But what happens when you run out of soap?

Can you refill it? The answer is yes! You can definitely refill your Lysol No Touch soap dispenser.

I’ll show you how. First, remove the empty soap cartridge from the dispenser. Next, unscrew the cap on the bottom of the cartridge.

Fill the cartridge with liquid hand soap, screw the cap back on, and reinsert it into the dispenser. That’s it! Now you can enjoy hassle-free handwashing with your favorite Lysol No Touch soap dispenser.

How Do You Open Lysol Hand Soap Dispenser?

If you’re having trouble opening your Lysol hand soap dispenser, don’t worry – you’re not alone. Many people have difficulty opening these types of dispensers, but there are a few simple tricks that can help. First, make sure that the dispenser is properly aligned with the bottle.

The pump should be all the way down in the bottle, and the nozzle should be pointing up. If the pump is too high or low, it can be difficult to get a good seal and may cause leaking. Next, try gently tapping on the top of the dispenser a few times.

This can sometimes loosen things up and make it easier to pump. If those two tips don’t work, you may need to remove the pump from the bottle entirely. To do this, first unscrew the cap from the back of the dispenser (counterclockwise).

Then, holding onto the base of the pump unit, pull it straight out from the front ofthe dispenser. Once it’s removed, you should be able to easily screw it back into place (clockwise) and get it working again.

How Do You Fill an Automatic Soap Dispenser?

If you’re like most people, you probably don’t think too much about how your automatic soap dispenser works. But if you’ve ever wondered how to fill an automatic soap dispenser, here’s a quick guide! Most automatic soap dispensers have a small opening on the back or bottom where you can insert a funnel.

Pour your liquid soap of choice into the funnel, being careful not to overfill the reservoir. You may need to use a paperclip or other small object to help push the soap through the opening and into the reservoir. Once the reservoir is full, screw the top back on and replace any batteries if necessary.

Your dispenser should now be ready to use!

How Do You Open a Lysol Refill?

If you need to open a Lysol refill, there are a few things that you will need to do. First, you will need to remove the cap from the bottle. Next, you will need to find the opening on the side of the bottle.

Once you have found the opening, you will need to insert the nozzle of the refill into the opening. Finally, you will need to screw on the cap that came with the refill.


If you have a Lysol automatic soap dispenser, you may be wondering how to refill it. Luckily, it’s a pretty easy process! First, make sure that the dispenser is turned off.

Then, remove the cap from the top of the dispenser. Next, insert the pump into a bottle of soap and screw on the cap. Finally, turn on the dispenser and test it out!

About Author:

Danyal is a Freelance Copywriter that has been writing for online publications including Home improvement, newsworthy blogs and even a few personal blogs. He has a passion for writing and loves to share his knowledge with everyone who wants quality information.

Leave a Comment