If your bathroom sink has a plunger, chances are you will need to remove it at some point. Plungers can become clogged with hair and debris, making them difficult to use. In some cases, you may need to replace the plunger with a new one.
Here are some tips on how to remove a bathroom sink plunger.
- Unscrew the knob at the top of the plunger
- Unscrew the base of the plunger
- Pull the plunger out of the sink
- Clean the area around the sink where the plunger was located
- Replace the knob on the sink
How to Clean Out a Sink Pop-up Drain Stopper
How to remove a pop-up sink drain without lever
If your pop-up sink drain is giving you trouble and you need to remove it, there are a few things you can do. First, try to remove the drain by unscrewing it with a wrench or pliers. If that doesn’t work, you may need to remove the entire sink drain assembly.
To do this, first remove the sink stopper if there is one. Next, use a wrench or pliers to unscrew the drain body from the drain tailpiece. Finally, remove the P-trap by unscrewing it from the drain tailpiece.
With the P-trap removed, you should be able to pull the drain body out from the sink.
Credit: www.youtube.com
How do I get the plunger out of my bathroom sink?
Assuming you’re referring to a toilet plunger:
To remove a toilet plunger from your bathroom sink, first make sure that the suction cup is clean and dry. If there is any dirt or grime on the suction cup, it will need to be removed before proceeding.
Next, locate the flange on the toilet plunger. The flange is the portion of the plunger that goes into the drain. Once you have found the flange, grasp it with both hands and pull the plunger straight up.
The plunger should come out of the drain easily. If it does not, you may need to use a little force to remove it.
How do you remove a plunger plug?
Assuming you’re talking about a toilet plunger:
To remove a plunger plug, first make sure the plunger is in the up position. Next, locate the retaining pin on the side of the plunger handle.
The retaining pin is usually silver and is held in place with a small c-clip. Use a flathead screwdriver or a small pair of needle-nose pliers to remove the c-clip. Once the c-clip is removed, the retaining pin can be pulled out, allowing the plunger plug to be removed.
How do you remove a pop-up drain stopper from a bathroom sink?
Assuming you are referring to a pop-up drain stopper that is connected to a lift rod:
There are a few ways to remove a pop-up drain stopper from a bathroom sink. The first thing you need to do is locate the drain lever.
This is usually located on the back of the sink near the drain. Once you have located the drain lever, use a flathead screwdriver to loosen the set screw. This will allow you to remove the lift rod.
If the set screw is not visible, or if it is seized, you may need to use a pair of pliers to remove it. Once the set screw is removed, the lift rod should come right out. If it is stuck, you may need to use a little force to remove it.
Once the lift rod is removed, the pop-up stopper should come right out. If it is stuck, you can try wiggling it back and forth until it comes loose. If that doesn’t work, you may need to use a pair of pliers to remove it.
That’s it! Now you know how to remove a pop-up drain stopper from a bathroom sink.
Conclusion
If your bathroom sink is clogged, you may be able to fix it yourself by removing the plunger. To do this, first make sure that the plunger is firmly attached to the sink. Then, use a pair of pliers to grip the plunger and pull it straight up.
If the plunger is stuck, you may need to use a screwdriver to pry it loose. Once the plunger is removed, you can clean out the drain using a drain snake or a plunger.