How To Remove Kitchen Faucet Without Basin Wrench?

Disclaimer: As an Amazon Associate I earn from qualifying purchases.

Updated: June, 2022

Your kitchen faucet is one of the most used and abused components in your home. Without an efficient faucet, your daily tasks of dishwashing and hand washing will be cumbersome. Hence it is important to keep your kitchen faucet working perfectly throughout its lifetime of usage. You may need to repair or replace your kitchen faucet, but the process is not very complicated. Firstly, you have to know how to remove kitchen faucet without basin wrench?

Keep reading……

How to Remove Kitchen Faucet Without Basin Wrench
How to Remove Kitchen Faucet Without Basin Wrench

How to remove an old kitchen faucet?

If you want to save yourself a lot of hassles and headaches, you should learn how to take care of a kitchen faucet and get your old kitchen faucet out without breaking it or needing any tools besides some basic hand tools and patience.

Why do you need to remove an old kitchen faucet?

When you want to repair or replace your faucet, you need to get rid of all the parts and need to remove an old kitchen faucet. If the spout, handles, sprayer nozzle, or other parts are worn out and leaking, they may need to be replaced. Some people prefer to have new fixtures that match each other as part of a remodeling project. In any case, if you want to replace a leaky faucet, the first step is to remove it.

RELATED: How To Clean Kitchen Faucet – Make Your Faucets Durability Double!

What is Basin Wrench?

The Basin Wrench is a tool that helps to remove and replace faucet parts and other plumbing fixtures under your kitchen sink.

The basin wrench is used to remove the hot and cold supply lines while at the same time removing other faucet parts without scratching the sink surface.

What’s a basin wrench used for?

The Basin Wrench is used for loosening and tightening fixtures below your sink like faucets, valves, etc. It also helps to remove supply lines that connect the faucets to the plumbing under the sink.

How to use a basin wrench on a kitchen sink?

A basin wrench is one of the most useful tools to make the kitchen sink faucet removal process easier. It can be used to remove the faucet of both the garden hose and kitchen sink. The purpose is quite obvious; the basin wrench makes it easier for you to unscrew the old faucet by using the force of the pliers while minimizing any effort needed.

Remove Kitchen Faucet Without Basin Wrench?

You may need some removal tools and an alternative to basin wrench. Have a look at what basin wrench substitute is used for removing kitchen sink faucets.

Kitchen faucet removal tools:

  • Screwdrivers
  • Channel-lock pliers
  • A clean cloth
  • Water pump plier
  • Sink drain wrench

Step by Step Guide to Remove Kitchen sink Faucet Without Basin Wrench:

Step: 1 Turn off the water to the faucet

Firstly, you have to turn off the water supply to your sink. Locate the shut-off valves under the sink. If you are not sure where it is, check with your property manager or whoever was in charge before moving into your home.

Most faucets have hot and cold water shut-off valves made of metal. The shut-off valve for the water supply to your faucet will have a lever that points down to stop or “shut” the water flow or points up at an angle to allow water through.

Step: 2 Release all air and water pressure:

Air can get inside your water valve even when there’s no flowing. This leftover air pressure may be a problem for you, especially if it holds onto some of that old moisture last time!

Step: 3 Disconnect water Hose:

If your faucet has a hose, take the hose loose from the kitchen faucet. If you don’t know how to do this, please check the manual.

If the hose is too tight for your fingers, use a pair of channel-lock pliers. Make sure that you don’t twist or pinch the rubber part of the hose when using this tool.

Still, you can’t get the hose loose from the faucet, don’t fret; you will be disconnecting it by taking it off of the sink’s supply tube or feeder hose.

Step: 4 Disconnect other valves below sink to remove kitchen faucet

After turning off the water supply, you will need to disconnect all other valves below your sink. This will be done before removing the kitchen faucet. The shut-off valve that supplies water to your dishwasher or garbage disposal may also be located under the sink. So, make sure that it’s disconnected before you start pulling out your faucet.

Step: 5 Remove old kitchen sink faucet

Now, you can start removing the kitchen sink faucet without a basin wrench. First of all, remove any decorative components like handles or spouts that are attached to your faucet at this time.

Next, use screwdrivers to remove the screws that attach the base of your faucet where it meets the sink.

RELATED: How To Fix A Leaky Kitchen Faucet Single Handle?

What to use instead of a basin wrench?

If you don’t have a basin wrench at the moment, don’t worry. You can use a socket wrench to remove the kitchen faucet. And it will be helpful to get the job done.

Where to buy a basin wrench to remove the kitchen faucet?

Basin Wrench is an essential tool for a faucet replacement. TEKTON 10 to 17 Inch Telescoping Basin Wrench is one of the best kitchen removing tools in today’s market. You can buy from everywhere, such as Amazon or Home Depot. If you want to save your time and energy and money, Amazon and other online stores are the best choices for you. 

q? encoding=UTF8&ASIN=B01D4ZF0MA&Format= SL250 &ID=AsinImage&MarketPlace=US&ServiceVersion=20070822&WS=1&tag=smartpro101 20&language=en US

You can buy a basin wrench at any local hardware store also. Just make sure that it’s large enough for your faucet and fits over the top of the drain hole.

Conclusion:

To Remove Kitchen Faucet Without Basin Wrench is a DIY project and you have to learn the steps before start working. If you don’t want to damage your kitchen sink, please place a bucket under the pipe before removing it. Good Luck!

If you still have any questions about this topic, don’t hesitate. If so, please share with us via the comment box below.

About Author:

Danyal is a Freelance Copywriter that has been writing for online publications including Home improvement, newsworthy blogs and even a few personal blogs. He has a passion for writing and loves to share his knowledge with everyone who wants quality information.

Leave a Comment