Assuming you need to know how to remove a bathroom sink drain in order to clean it:
1. Place a bucket or bowl underneath the sink drain to catch any water that may drip out when you remove the stopper.
2. Use a pair of pliers to unscrew the knob at the top of the stopper.
If the knob is stuck, wrap a rag around the pliers to protect the finish.
3. Pull the stopper straight up to remove it.
4. Use a plunger to dislodge any debris that may be caught in the drain.
5. Pour a cup of boiling water down the drain to help clear any remaining debris.
6. Replace the stopper and screw the knob back on.
How to Replace a Bathroom Drain and Sink Trap
- Locate the drain stopper lever underneath the sink
- This will be either a knob or a lever, depending on the model of your sink
- Use a pair of pliers to grab onto the stopper lever and twist it counterclockwise
- This will loosen the stopper and allow you to pull it out
- Take a look at the drain pipe underneath the sink
- You may see a build-up of hair and other debris around the pipe
- Use a plumbing snake or a wire hanger to reach down and clear out the drain pipe
- Once the drain pipe is clear, put the stopper back in place and turn the lever clockwise to tighten it
- Test the sink by running some water to see if the drain is now clear
How to remove drain stopper from sink
If your drain stopper is giving you trouble, you may be wondering how to remove it. Here are some instructions on how to remove drain stopper from sink.
First, identify the type of drain stopper you have.
There are two main types of drain stoppers- push-pull and twist-off. If you have a push-pull stopper, there will be a small knob or lever on the top of the stopper. If you have a twist-off stopper, there will be a small knob or lever on the side of the stopper.
Next, locate the knob or lever and give it a firm push or twist. The stopper should come off easily. If it does not, try using a little more force.
If the stopper still does not come off, you may need to use a pair of pliers.
Once the stopper is removed, you can clean it with soap and water. If the stopper is severely damaged, you may need to replace it.
Credit: www.homedepot.com
How do you unscrew a bathroom sink drain?
Assuming you need to remove the entire drain:
-Start by removing the sink stopper. This is usually done by unscrewing a knob or handle located near the drain.
-Once the stopper is removed, use a pliers or wrench to remove the drain pipe. There will be a nut holding the pipe in place.
-With the drain pipe removed, you should now be able to see the P-trap.
This is the curved pipe that connects the drain to the sewer line.
-There will be two nuts holding the P-trap in place. Use a wrench to loosen and remove these nuts.
-With the P-trap removed, you should now be able to see the drain flange. This is the metal plate that the drain pipe was attached to.
-There will be four screws holding the flange in place.
Use a screwdriver to remove these screws.
-With the screws removed, the flange should now be loose. Carefully pull it out of the sink.
-You should now be able to see the drain tailpiece. This is the pipe that connects the sink to the P-trap.
-There will be a nut holding the tailpiece in place.
Use a wrench to remove this nut.
-With the nut removed, the tailpiece should now be loose. Carefully pull it out of the sink.
-You should now be able to see the sink drain.
How do you remove a pop-up sink plug?
Assuming you’re talking about a pop-up drain assembly for a bathroom sink:
To remove a pop-up sink plug, first remove the cap on the back of the drain by unscrewing it. Next, use a pair of pliers to remove the retaining nut that holds the pop-up in place.
Finally, pull the pop-up out of the drain.
Conclusion
If your bathroom sink is draining slowly or water is backing up into the sink, it’s probably time to take out the drain. Whether your sink is clogged with hair, soap scum, or something else, removing the drain is a relatively easy process.
To take out the bathroom sink drain, start by removing the stopper.
If your sink doesn’t have a stopper, there will be a plug located under the sink. Once the stopper is removed, use a plunger to try and dislodge the clog. If that doesn’t work, you’ll need to remove the P-trap.
The P-trap is the curved pipe located under the sink. To remove it, unscrew the two nuts that hold it in place. Once the P-trap is removed, you should be able to see the clog.
If you can’t reach it, you may need to use a plumbers’ snake.
Once the clog is removed, reassemble the P-trap and stopper, and your sink should be good as new!